506 found, showing page 9 of 34
#8-32 x 3/4" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #8-32
- Length: 3/4"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#8-32 x 1" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #8-32
- Length: 1"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#8-32 x 1-1/4" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #8-32
- Length: 1-1/4"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#8-32 x 1-1/2" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #8-32
- Length: 1-1/2"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#8-32 x 2" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #8-32
- Length: 2"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#8-32 x 2-1/2" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #8-32
- Length: 2-1/2"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#8-32 x 3" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #8-32
- Length: 3"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#10-24 x 1/2" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #10-24
- Length: 1/2"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#10-24 x 3/4" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #10-24
- Length: 3/4"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#10-24 x 1" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #10-24
- Length: 1"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#10-24 x 1-1/4" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #10-24
- Length: 1-1/4"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#10-24 x 1-1/2" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #10-24
- Length: 1-1/2"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#10-24 x 2" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #10-24
- Length: 2"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#10-32 x 1/2" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #10-32
- Length: 1/2"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#10-32 x 3/4" Flat Head Phillips Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: #10-32
- Length: 3/4"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
